Featured

  • One of Hottest for Forming Fabric Cheap Price - Product specification of TS-3 filling pre flocculant – Jingxin

    One of Hottest for Forming Fabric Cheap Price - Product specification of TS-3 filling pre flocculant – Jingxin

    The advantages of TS-3 are as follows: 1. The paper quality indicators will be significantly improved, such as internal adhesion and tensile strength; 2. Better filler retention helps to reduce production costs; 3. Greatly improve the white water circulation system. Characteristic: Chemical properties: Modified polyacrylamide Appearance: Liquid Ionic: amphoteric Compounds Specific gravity one point zero five: ± 0.05(25℃) Viscosity: ≤ 50000 cps (25 ℃, viscometer)   60 rpm) Solid content,%: ...
  • Factory wholesale Shute Supporting Binder - Retention and Drainage Aid PCF-1 – Jingxin

    Factory wholesale Shute Supporting Binder - Retention and Drainage Aid PCF-1 – Jingxin

    Main ingredients   cationic polyacrylamide Physical and chemical properties Appearance       White free flowing particles Ionic type         cation Solid content      ≥88% Soluble         transparent slightly viscous solution (0.5% aqueous solution) Performance and characteristics Retention and drainage aid. PCF can increase the retention of web fiber and other wet end additives, accelerate the filtration and dehydration of web, improve the operation of paper machine and reduce the productio...
  • Factory wholesale Shute Supporting Binder - Filling pre flocculation enhancer KS-300 – Jingxin

    Factory wholesale Shute Supporting Binder - Filling pre flocculation enhancer KS-300 – Jingxin

    The advantages of pre flocculation technology are as follows: 1. Better filler retention; 2. Improve wet end condition (white water circulation system is better); 3. The strength of the paper is enhanced and the quality of the paper is improved. Physical properties: Chemical properties: Modified polyacrylate aqueous solution Appearance: Clear yellow liquid PH: 3.0 ± 1.0 (at 25℃) Specific gravity: 1.25 ± zero point one Solid content: ≥ 40.0% (150 ℃, 2 hours) Viscosity: ≤ 2000 CPS Charge: Ampho...
  • Bottom price Polyester Wire Mesh - Wet strength agent TC-1 – Jingxin

    Bottom price Polyester Wire Mesh - Wet strength agent TC-1 – Jingxin

    Main components: PAE resin Physical and chemical properties Appearance: light yellow transparent liquid PH value (25 ℃): 4.0-5.0 Viscosity (25 ℃): ≤ 50MPa. S Solid content (%): 12.5 ± zero point five Performance and characteristics 1. Water soluble, cationic, non-toxic and non irritating. 2. High efficiency, good synergy, wide range of pH, and better effect under neutral and weak alkaline conditions. 3. Good storage stability at room temperature. 4. It is more convenient to recycle the damage...
  • 2022 High quality Dryer Mesh Belt - Softener BR-2 – Jingxin

    2022 High quality Dryer Mesh Belt - Softener BR-2 – Jingxin

    Main components: Cationic surfactant Technical index Appearance state Light colored viscous body Solid content (105 ℃,%) 10-12 PH (1% aqueous solution) 4.0-6.0 Ionicity Weak Yang Performance characteristics 1. Strong affinity for paper fiber and high retention rate. 2. Give the paper excellent smoothness and fluffy, improve the softness, handle and aesthetic feeling of the paper. 3. It has good stability and compatibility. It can be stable in the working solution in the range of pH 3-10, and ...
  • Factory wholesale Small Loop Dryer Mesh Factory - Mp-10 product specification for wood pretreatment – Jingxin

    Factory wholesale Small Loop Dryer Mesh Factory - Mp-10 product specification for wood pretreatment – Jingxin

    Effect Reduce the amount of chemicals saving the energy consumption of slurry grinding Decrease of KP value Improve whiteness Physical properties Appearance: brown to light brown liquid Smell: slightly fermented Density: 1.00-1.20g/ml PH: value 4.5-5.0 Application method Application method Applicable process Dosage added Raw material spray Raw material soaking 1. Suitable temperature: 25 ~ 70 ℃, optimum temperature: 40 ~ 60 ℃2. The suitable pH value is 4.0 ~ 9.0, and the optim...
  • New Fashion Design for Synthetic Filament For Paper Machine - Mp-10 product specification for wood pretreatment – Jingxin

    New Fashion Design for Synthetic Filament For Paper Machine - Mp-10 product specification for wood pretreatment – Jingxin

    Effect Reduce the amount of chemicals saving the energy consumption of slurry grinding Decrease of KP value Improve whiteness Physical properties Appearance: brown to light brown liquid Smell: slightly fermented Density: 1.00-1.20g/ml PH: value 4.5-5.0 Application method Application method Applicable process Dosage added Raw material spray Raw material soaking 1. Suitable temperature: 25 ~ 70 ℃, optimum temperature: 40 ~ 60 ℃2. The suitable pH value is 4.0 ~ 9.0, and the optim...
  • Factory Price Polyester Forming Wire - Surface sizing agent WS – Jingxin

    Factory Price Polyester Forming Wire - Surface sizing agent WS – Jingxin

    Physical and chemical properties: Main component Anionic charged styrene acrylate copolymer Appearance: Brown aqueous dispersion Solid content (%) 25±1% PH value (25 ℃) 4.0-6.0 Viscosity (25 ℃) <30cp Performance characteristics: 1. Improve the water resistance and surface strength of paper and paperboard, reduce the paper wool and powder 2. Improving printability of finished paper 3. Reducing the amount of sizing agent in pulp Usage and precautions: 1. WS is weakly negative a...
  • PriceList for Sludge Dewatering Belt - Filling pre flocculation enhancer KS-300 – Jingxin

    PriceList for Sludge Dewatering Belt - Filling pre flocculation enhancer KS-300 – Jingxin

    The advantages of pre flocculation technology are as follows: 1. Better filler retention; 2. Improve wet end condition (white water circulation system is better); 3. The strength of the paper is enhanced and the quality of the paper is improved. Physical properties: Chemical properties: Modified polyacrylate aqueous solution Appearance: Clear yellow liquid PH: 3.0 ± 1.0 (at 25℃) Specific gravity: 1.25 ± zero point one Solid content: ≥ 40.0% (150 ℃, 2 hours) Viscosity: ≤ 2000 CPS Charge: Ampho...
  • Good quality High Speed Paper Machine - Filling pre flocculant t-360 – Jingxin

    Good quality High Speed Paper Machine - Filling pre flocculant t-360 – Jingxin

    The advantages of pre flocculant t-360 are as follows: 1. The quality of paper can be improved, such as internal adhesion and tensile strength; 2. Better filler retention can save production cost; 3. The white water circulation system will be effectively improved; 4. Improve the evenness of paper. characteristic: Chemical properties: Modified polyacrylamide Appearance: Liquid Ionic and: Cationic Specific gravity one point zero two: ± 0.05(25℃) Viscosity: ≤ 100000 CPS (25 ℃, viscometer) Soli...
  • factory low price Wire Wrapped Screen - P-1 as a papermaking assistant – Jingxin

    factory low price Wire Wrapped Screen - P-1 as a papermaking assistant – Jingxin

    Physical properties Exterior: cream or light yellow liquid Active component: ≥ 30.0% Density (20 ℃): 1.05-1.28g/cm ³ PH: value (1% aqueous solution) 6-8 The penetration force (25 ℃): < 5 seconds can reach 250g/l Product characteristics 1. The agent is a kind of anthraquinone cooking assistant which can be dissolved in alkali solution and has permeability. 2.Theproduct is soluble in alkali solution, easy to mix with wood slices evenly and penetrate, with fast oxidation-reduction speed and l...
  • High Performance Duplex Paper Machine - Filler pre flocculation enhancer AS-8 – Jingxin

    High Performance Duplex Paper Machine - Filler pre flocculation enhancer AS-8 – Jingxin

    The advantages of pre flocculation are as follows: 1. The improvement of paper quality, such as the internal bond strength, tensile strength, etc; 2. Improve the filler retention rate and save the production cost 3. Improve the white water circulation of paper machine. Physical properties: Main components: Modified polyacrylamide aqueous solution Appearance: Opaque white liquid PH: 7.5 ± 1.0 ( 25℃) Specific gravity: 1.05 ± 0.1(25℃) Solid content: ≥ 30.0% (150 ℃, 5H) Viscosity: ≤ 2000 CPS Char...
123456 Next > >> Page 1 / 270